Tek_Logo_RGB.jpg

 

Keithley logo

 
 
DAQ6510

DAQ6510 images GIF

contact_us_small.jpg
DAQ6510_Datasheet_button_TekVibrantBlue

DAQ6510_modulesDatasheet__TekVibrantBlue

 

Data Acquisition & Logging Multimeter System

The DAQ6510 is a precision data acquisition and logging system that creates a new level of simplicity compared with the often complicated configuration and control found in many stand-alone solutions. A large 5-inch (12.7 cm) multi-touch display will guide users through set-up, data visualization, and analysis, removing the necessity of a PC and custom software for many applications. If you prefer or require a PC, a complement of IVI and Labview drivers and the Keithley KickStart Instrument Control Software are available to help with any application.

 

DAQ6500 Displays

 

Reduce your test setup, execution, and analysis time

Set up and run a test simply and quickly without having to write a test program. The DAQ6510 Data Acquisition and Logging Multimeter System's intuitive touchscreen provides simple configuration with visual and intuitive test setups, real-time visualizations of scan status for catching problems early to avoid lost test time, and easy analysis of test data.

Highlights

  • Configure: Setup a multi-channel scan with multiple measurement functions using one measure and scan configuration menu.

  • Run and monitor: Display the progress of the scan during the test to immediately see measurements out of range and limits exceeded.

  • Analyze: Display and analyze results using the plotting and statistics functions. Use the touchsceen's pinch and zoom capability to study results in depth. Use cursors to compute statistics on segments of the data.

Watch this video to see how to set Alarms and Limits with the DAQ6510 Play icon.png
Make a wider range of measurements

The DAQ6510 is made to measure with 6½-digit resolution and 15 built-in measurement functions. Make low-current, low-resistance, and temperature measurements, and see transient signals with the built-in digitizer.

Highlights

  • Voltage: 100 nV to 1000 V with 0.0025% basic DCV accuracy

  • Current: 1 pA to 3A

  • Resistance: 1 µΩ to 120 MΩ

  • Capacitance: 0.1 pF to 100 µF

  • Temperature measurement with thermocouples, resistance temperature detectors, and thermistors from -200°C to 1820°C

  • 1 M sample/s, 16-bit digitizer with 7 million readings storage

  • Have more options for test systems with 12 plug-in switch modules and up to 80-channel capacity

 DAQ6510 & Cards iages

 

 

 

 

DAQ6510 Temperature Chamber Setup

 

 

 

Reduce test time

Maximize the amount of data collected in the minimum amount of time. Make faster measurements, switch channels faster, and scan more channels.

Highlights

  • Make measurements as short as 0.0005 power line cycles or 8.3 µs (10 µs) for 60 Hz (50 Hz) power lines.

  • Scan at the rate of 800 channels per second with the solid-state multi-plexer plug-in switch module.

  • Scan up to 80 2-pole channels for testing a statistically significant number of DUTs in a single test.

 

Connect to your DUTs quickly and reliably

The DAQ6510 makes you more efficient before you even start testing with mass-terminated, D-sub connections on many of its plug-in switch modules. This minimizes downtime when changing plug-in switch modules during system maintenance or when you're setting up a new test system.

 

 

DAQ6510 D-Sub Connector Removal

 

DAQ6510 Interface Option Cards
Choose from a complete set of interface options

Standard LAN, LXI, and USB interfaces allow easy integration into your test system. Optional, field-installable GPIB and RS-232 interfaces include six digital I/O ports for direct instrument-to-instrument synchronization and communication. The DAQ6510 will work easily with any PC interface you choose.

 

Fast PC automation with the KickStart Data Acquisition Application

Use the KickStart Instrument Control Software to quickly program a data acquisition test on a PC. The software does not require programming; just enter a test setup using the menu screens. Then visualize your results in tabular and graphical formats.

Datasheet  Keithley KickStart instrument control software thumb

 

Download Kickstart Software label


Models
Model
Channels

Plug-in Switch Module

Digitizer


 

DAQ6510

Up to 80
12 Options
1 Msamples/s DataSheet&RequestQuote_buttonTek_Vivid_Green

DAQ6510-7700

20
1 1 Msamples/s DataSheet&RequestQuote_buttonTek_Vivid_Green

 

  Request_demo_button_vividblue   Contact Us nobg-1.png  

 

DAQ Data Acquisition Primer: An Introduction to Multi-Channel Measurement Systems

Download This Primer  for tips and techniques for making multi-channel measurements in a variety of applications.  Learn about:

  • Relay types and switch card options for making multi-channel measurements

  • Common data acquisition measurement types

  • Guidelines for selecting a data acquisition system

  • Software support for data acquisition equipment

 Data Acquisition Primer


Applications
DAQ6510_Application-4

 

Watch this video to see how to set up a temperature scan with the DAQ6510. 

Play icon.png

You will learn how to:

  • Export data and front panel screenshots to a USB drive.
  • Graph up to 20 channels at a time and use on-screen analysis tools to help gain knowledge of your defined measurements.
  • Start the scan and observe the status on the instrument front panel.
  • Apply limits on channels to help provide performance visibility on the scan as it is in process, flagging any problems spots where the limit is exceeded.
  • Apply labels to each of your channels of interest to better identify the location on your device where the temperature is being sampled.
  • Configure up to 80 channels for temperature measurements with thermocouples.

 

Perform environmental testing and accelerated life testing with confidence

Set up a test on a statistically significant number of devices quickly using the touchscreen display. Monitor the status of the test while the test is in progress. See data in graphical or tabular form on the touchscreen display.

 Highlights
  • Test up to 80 devices in one setup with a single DAQ6510 mainframe.

  • Expand up to a higher channel count if necessary using the TSP-Link® interface to connect and control multiple DAQ6510 mainframes.

  • Monitor temperature over the range of -200? C to 1820? C with any of 8 different thermocouple types, 5 different RTDs, or 3 different thermistors.

  • Set limits and define critical channels to monitor during testing to know immediately when a problem occurs.

  • Store test data on an external USB drive or on a PC to ensure important data is not lost.

  • Program the DAQ6510 to re-start following the loss of power to minimize lost test time during evenings and weekends.

 

 

 

 

Cost-effectively test lower value resistance components

Test components such as cables, low value resistors, and connectors accurately and reliably with the DAQ6510.

Highlights

  • Measure with 1 µΩ sensitivity.

  • Use the 4-wire resistance function to eliminate test lead resistance error.

  • Use offset compensation to eliminate thermal contact error.

DAQ6510 Application 5

 

 

 

DAQ6510 Application 6

 

 

Read this Application Note  to learn more about increasing production throughput using the DAQ6510 Data Acquisition System.
DAQ Production Throughput App Note
   

 

 

 

 

 

Increase test capacity and increase throughput in manufacturing

Use the DAQ6510 to increase the number of devices with a single test system and maximize test capacity. Take advantage of the faster measurement time and faster scanning rate that the DAQ6510 offers.

Highlights

  • Expand test system capacity up to 80 devices for one test system.

  • Take fast measurements with a 0.0005 power line cycle integration time.

  • Use the solid state relay card for high volume manufacturing and scan through DUTs at a rate as high as 800 channels/s.

  • Let the DAQ6510 execute and control a test to minimize communication time with a PC by using the DAQ6510’s internal TSP program execution.