Keithley logo Contact Us


Switching & Data Acquisition & Logging Systems

Selection_Guide_button_Tek_vividblue.jpg
 

Precision measurement, switching, data logging, and control



Keithley Switching & Data Acquisition Systems

Keithley offers numerous options for data logging information from multiple devices for:

  • Environmental monitoring of DUT temperature and other parameters in a temperature chamber
  • Burn-in testing
  • HALT and HASS accelerated life testing
  • Failure analysis

Multimeter, data acquisition switch systems offer capacity as high as 576 channels with the precision measurement capability of 6½-digit and 7½-digit digital multimeters (DMMs).

In addition, Keithley provides multiple channel systems for testing automotive airbag inflator devices, wiring harnesses, and seat belt pre-tensioner actuator modules. Up to 40 devices can be tested in a single test setup with one instrument. The sourcing, measurement, and signal switching are all included in a compact 2U high, half-rack width instrument.

For automated testing of RF and microwave devices, Keithley provides a microwave switch system with bandwidth up to 40 GHz and 32-channel capacity.

If you need a DMM with lower channel capacity or just a basic DMM, then learn about our DMM6500 6½-digit Bench/System DMM.

 

DAQ6510 Data Acquisition and Logging, Multimeter System


The DAQ6510 is a precision data acquisition and logging system that creates a new level of simplicity compared with
the often complicated configuration and control found in many stand-alone solutions. A large 5-inch (12.7 cm) multi-touch
display will guide users through set-up, data visualization, and analysis, removing the necessity of a PC and custom
software for many applications. If you prefer or require a PC, a complement of IVI and Labview drivers and the Keithley
KickStart Instrument Control Software are available to help with any application.

DAQ6510 Data Acquisition & Logging Multimer System

  • Two-slot, 80-channel capacity
  • 6½-digit DMM for precision measurement
  • Touchscreen display to simplify setup, monitoring, and data analysis

Learn more...

 

Series 3700A Systems Switch/Multimeter


The Model 3706A system switch with high performance DMM contains six slots for plug-in cards in a compact 2U high enclosure that easily accommodates the needs of medium to high channel count applications. When fully loaded, a mainframe can support up to 576 two-wire multiplexer channels for unrivaled density and economical per channel costs. The result is a tightly integrated switch and measurement solution that’s equally at home on the bench or in the rack.

 

3706A

Model 3706A

Model 3706A Digital Multimeter Six Slots Systems Switch w/USB/Ethernet/GPIB

The Model 3706A system switch with high performance digital multimeter (DMM) contains six slots for plug-in cards in a compact 2U high (3.5 inches/89mm) enclosure that easily accommodates the needs of medium to high channel count applications. When fully loaded, a mainframe can support up to 576 two-wire multiplexer channels for unrivaled density and economical per channel costs. The high performance multimeter provides a tightly integrated switch and measurement system that meets the demanding application requirements in a functional test system or provides the flexibility needed in stand-alone data acquisition and measurement applications.

Datasheet & Request Quote button - Tek Vibrant Blue

Model 3706A-NFP Digital Multimeter Six-Slot System Switch  without Front Panel Display and Keypad

Model 3706A-NFP

Model 3706A-NFP Digital Multimeter Six Slots Systems Switch without Front Panel Display and Keypad

The Model 3706A-NFP system switch with high performance digital multimeter (DMM) without front panel display and keypad contains six slots for plug-in cards in a compact 2U high (3.5 inches/89mm) enclosure that easily accommodates the needs of medium to high channel count applications. When fully loaded, a mainframe can support up to 576 two-wire multiplexer channels for unrivaled density and economical per channel costs. The high performance multimeter provides a tightly integrated switch and measurement system that meets the demanding application requirements in a functional test system or provides the flexibility needed in stand-alone data acquisition and measurement applications.

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

 
Series 2700 Multimeter/Data Acquisition/Switch Systems

2750 DAQ

Model 2750

Model 2750 Digital Multimeter Data Acquisition and Datalogging System w/5 Slots GPIB/RS232

Integra Series systems (2700, 2701, 2750), combine precision measurement, switching, and control in a single, tightly integrated enclosure for either rack-mounted or benchtop applications. These cost-effective, high performance test platforms offer affordable alternatives to separate digital multimeters and switch systems, dataloggers/recorders, plug-in card data acquisition equipment, and VXI/PXI systems. The Integra Series plug-in switching and control modules offer unmatched flexibility and testing efficiency for a wide range of industries and applications.

 Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

 


Series 2790 Airbag and Electrical Device Test System

These high voltage, multichannel resistance measurement solutions speed and simplify electrical checks of airbag inflators and a variety of other automotive electrical test applications. They combine all the sourcing, measurement, and signal routing capabilities required to measure insulation resistance and conductor continuity in one compact, affordable package. A memory pattern test sequencer allows the mainframe to store and execute pre-programmed test sequences to ensure high testing throughput.

Model 2790-H Digital Multimeter Single-module System for Low and High Voltage/Resistance Applications

Model 2790-H

Model 2790-H Airbag & Electrical Device Test System
The Model 2790-H is a single-module system designed for both low current and high voltage ohms (10MΩ to 1GΩ) applications. This "base" system provides all the capabilities needed for electrical testing of either single- or dual-stage inflators in single osition test stands (for example, test stands that test only one single- or dual-stage airbag at a time).

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

Model 2790-H Digital Multimeter Single-module System for Low and High Voltage/Resistance Applications

Model 2790-L

Model 2790-L Airbag & Electrical Device Test System
The Model 2790-L is configured for low voltage source/ohms-only measurement applications, such as continuity-only testing of side/seat airbags and seatbelt pre-tensioners or other programmable I-source resistance applications in which high voltage resistance testing is not required but precise control of source current is.

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

Model 2790-H Digital Multimeter Single-module System for Low and High Voltage/Resistance Applications

Model 2790-HH

Model 2790-HH Airbag & Electrical Device Test System
The Model 2790-HH is configured for applications that require parallel testing or high voltage "soaking." Like the Model 2790-H, it is designed for both low current and high voltage ohms applications and can test either single- or dual-stage inflators. However, with two plug-in modules, it also has the capacity to test two inflators at once, maximizing test throughput.

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

Model 2790-H Digital Multimeter Single-module System for Low and High Voltage/Resistance Applications

Model 2790-HL

Model 2790-HL Airbag & Electrical Device Test System
The Model 2790-HL is designed for applications where it is preferable to segregate high voltage sourcing/ohms measurement and low current sourcing/ohms measurement into two separate modules. This design was developed for use in combination testing applications, such as inflator electrical checks of safety steering wheel or seat assemblies that also include switch or other ancillary device tests.

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg

Model 2790-H Digital Multimeter Single-module System for Low and High Voltage/Resistance Applications

Model 2790-A

Model 2790-A Airbag & Electrical Device Test System
The Model 2790-A, which is similar to the Model 2790-H, enables high voltage ohms measurements down to 1MΩ.

With the addition of a Model 7702 40-channel differential multiplexer module (part of the Integra family of switch/measure solutions), the Model 2790-A + Model 7702 opens the door to higher channel count applications, such as hi-pot/continuity testing of connectors, harnesses, and power distribution devices up to 500V (internally sourced) up to 40 channels.

Datasheet_&_Request_Quote_button_TekVibrantBlue.jpg