 |
 |
|
|||
Keithley 4200A-SCS Parameter Analyzer
Up to 2X Faster Characterization Insight for Your Bold DiscoveriesThe 4200A-SCS is a modular, customizable, and fully-integrated parameter analyzer that provides synchronized insight into current-voltage (I-V), capacitance-voltage (C-V), and ultra-fast pulsed I-V electrical characterization. Its optional 4200A-CVIV Multi-switch Module enables effortless switching between I-V and C-V measurements without re-cabling or lifting prober needles. The highest performance analyzer, the 4200A-SCS accelerates testing of complex devices for materials research, semiconductor device design, process development, or production. |
|||||
The NEW model...
Automatic Measurements
Features and Benefits |
| Features |
Benefits |
|
Completely integrated mainframe with source measure units, C-V unit, and ultra-fast pulsed I-V unit |
Perform I-V characterization, AC impedance measurements, waveform capture, and transient I-V measurements with speed, clarity, and confidence |
|
Clarius™ GUI-based Software with touch-and-swipe or point-and-click control |
Enables advanced test definition, parameter analysis, graphing, and automation capabilities for clear, uncompromised measurement and analysis |
|
Built-in, context-sensitive measurement videos and over 450 application tests |
Jumpstart testing and provide measurement assistance and troubleshooting guidance |
| I-V source measurement unit (SMU) | ±210 V / 100 mA or ±210 V / 1 A modules, 100 fA measure resolution, and 0.1 fA measure resolution with optional preamp |
|
C-V multi-frequency capacitance unit (CVU) |
AC impedance measurements (C-V, C-f, C-t), 1 kHz – 10 MHz frequency range |
| I-V/C-V multi-switch module (CVIV) | Easily switch between I-V and C-V measurements or move the C-V measurement to any terminal without re-cabling or lifting prober needles |
| Pulsed I-V ultra-fast pulse measure unit (PMU) | Two independent or synchronized channels of high-speed pulsed I-V source and measure; 200 MSa/sec, 5 ns sampling rate; extend current sensitivity to tens of picoamps with optional preamp |
| High voltage pulse generator unit (PGU) | Two channels of high-speed pulsed V source; ±40 V (80 V p-p), ±800 mA |
| Completely customizable and fully upgradable | Add only the instruments needed now – or later |
Modules |
| Module |
Description |
Datasheet |
|
4200-BTI-A |
ULTRA FAST BTI PKG FOR MODEL 4200-SCS |
|
|
4200-PA |
REMOTE PREAMP OPT 4200-SMU AND 4210-SMU |
|
|
4200-SMU |
MEDIUM POWER SOURCE-MEASURE UNIT |
|
|
4200A-CVIV |
MULTI SWITCH |
|
|
4210-CVU |
4210 CAPACITANCE VOLTAGE UNIT 1KHZ-10MHZ |
|
|
4210-SMU |
HIGH POWER SOURCE-MEASURE UNIT |
|
|
4220-PGU |
DUAL CHANNEL PULSE GENERATOR |
|
|
4225-PMU |
ULTRA-FAST I-V MODULE FOR THE 4200-SCS |
|
|
4225-RPM |
REMOTE AMPLIFIER/SWITCH FOR THE MODEL 4225-PMU |
Preconfigured Systems |
| Configuration |
Specification |
|||
|
210V/100mA, 0.1 fA resolution For two- and three-terminal devices, MOSFET, CMOS characterization
|
|||
|
210V/100mA, 0.1 fA resolution, 1kHz - 10MHz For high κ dielectric, deep submicron CMOS characterization 4200A-SCS parameter analyzer (2) 4200-SMU Module (1) 4200-PA Preamp (1) 4210-CVU Capacitance-Voltage Module (1) 8101-PIV Test fixture with sample devices |
|||
|
210V/1A, 0.1 fA resolution, 1kHz - 10MHz For power devices, high κ dielectric, deep submicron CMOS device characterization 4200A-SCS parameter analyzer (2) 4200-SMU Module (2) 4210-SMU (1) 4200-PA Preamp (1) 4210-CVU Capacitance-Voltage Module (1) 8101-PIV Test fixture with sample devices |
